How to Remove a Lens from a Nikon Camera | Step by Step

Nikon DSLR camera comes with different lenses, as opposed to different DSLR models. This allows you to shoot at different angles and scenarios. When taking a portrait with the Nikon D3200 at a close range, a 50 mm lens is obvious.

However, whatever lenses you choose, try to learn how to remove a lens from a Nikon camera properly. Because changing the lenses from the Nikon will be challenging, especially for the novice. Sometimes it may cause so many difficulties towards the camera.

For detailed information about these issues, continue reading the article.

How to Remove Lens from Nikon Camera – Basic Process

This is a common step that you need to follow. Changing the lenses from a Nikon camera is like putting off the cloth from any obstacles. Just do the below procedures step by step.

Step 01- Switch Off the Camera Power Button

First, switch off the power button completely. It’s a vital thing before you’re going through the deep. You may wonder why it is necessary? Unlike curiosity, this question always seduces me a lot. But the answer isn’t satisfactory. Most of the camera’s manuals tell you that you can’t take off the lenses while the camera is on.

Taking a lens off without first turning off the camera will just fry the lens, the camera, or both. When you disengage the lenses from the camera, it will directly attack the VBat (6-volt lens power) pins. Then what is the VBat pin? With the Nikon cameras, the leftmost pins on the body are known as the VBat pins.

VBat here works as the communicative corridor that passes the information to the main lenses. To reveal and rotate the lenses counterclockwise, you must first turn the power switch off on your camera.

Step 02- Apart from the Cap Cover from The Lens

In this section, you need to remove the cap cover from the lenses. Put it at the top of the camera once you’re ready to replace it again.

Step 03- Keep Pressurize the Release Button On the Camera

Now pressurize the release button of the camera. Next, rotate the lens counterclockwise but don’t be in a hurry. Just gently push the lens to let it come from the camera deck. After taking off the old lenses from the camera, place the new one there, following the same queries. But don’t forget to take off the mounted cap cover from the other lens.

Step 04- Keep The Mounting Index Mark Alignment

Now keep the mounting index mark in alignment. Try to set it out just inside that camera. Then slide the lens into it. Next, keep it twisted or rotated to attach the lens inside the camera. You’ll hear a click once it gets attached to the photo shooter successfully.

Thus, you can attach or remove the lens from any model of Nikon fruitfully. But somewhere, a few changes or difficulties may occur that vary depending on the camera’s model. You should also check the owner’s manual and get some instructions from us. We discussed those affairs later based on models sections.

How to Remove Lens from Nikon D3100

To detach the camera body from the Nikon D3100, follow the below procedures.

• Turn off the Nikon camera and locate the lens releasing buttons. Next, label up the preceding figure.

• Next, click on the lens release/ exit buttons. And keep continuing to pressurize it until you notice the mounting index is aligned with the (camera’s body part) index. In short, try to line up the tiny white dot stands or mounting index dots.

• Finally, put on the rear protective glass over the back of the lenses. If you don’t want to put a second portrait lens into the camera, remember this: always put back the mounted cap with it. It will protect the camera lenses from dust.

How Does a Nikon Lens F-Mount Work to Improve Proficiency In Photography Skills?

To achieve proficiency in photography skills, you should learn the F-mount attached to Nikon. Nikon F-mount has been a new DSLR interchangeable camera since 1959. The previous SLR camera has less compatibility to focus on any obstacles from critical distances. The authority felt the necessity to change their previous customization as the technology went too far away.

For this reason, they had changed and upgraded many functions and attached them to Nikon F-mount SLR cameras. One of the best parts of this camera will help you choose a larger selection of lenses. Maintaining the wider and basic outlet structure for a longer period seems broader. It constantly provides an array for the other compatible lenses.

So here, the lens mount plays a vital and symbiotic element for professionals and enthusiasts. In short, the Nikon-F mount was invented to provide the latest and highest evaluations for reliable and long-serving lens mounts.

Frequently Asked Question (FAQ)

How to Remove Lens from Nikon d3200?

Nikon d3200 lens changes are kinda similar to camera lens interchangeable procedures. At first, disclose or turn on the main power button of the camera. Then align both the mounting mark camera and lens.

To hold the lens front glass, you can use tissue paper. Rotate and turn it forward to tighten the current one. You may want to keep tapping on the power release button until the lens comes out properly.

How to Remove Lens from Nikon D3500?

Just turn off the red power button and wait for a while. Most of all, the Nikon d3500 is an incredible camera for beginners. Besides, most of them are highly manufactured, like Android systems.

So without any hassle, you can change the lens from it. Press and hold the power release button for that to happen. And keep it up until the lenses are getting loosened inside the camera.

How to Remove Lens from Nikon D5600?

To remove the lens from it, just turn it to the left. Make sure the camera is turning off properly. Then press the lens, put off the buttons, and hold it. At the same time, continue to turn on the lenses anti-clockwise. Once it comes out from the deck, put off the lens.

Finally, cover the lens with a protective cap. Then set up the new lenses’ liner the body and turn it clockwise. Tightened the lens by applying as much pressure as you could. Don’t forget to adjust the mounting index dots on the body. Next, turn the lens clockwise by a quarter turn. And it’s all done.

Conclusion

Lastly, interchangeable lenses are now clearly useful for getting ready before shooting. Nothing is more simple and facile like this job, we guess. Only you need to cover up all the procedures righteously. Investing time and effort into learning how to remove lenses from Nikon cameras will only prove useful.

So try your best to change the lenses from the camera as far as possible. Simply power off the switch button and mount the lenses in a circular motion. And the task is done.